Installing Molly¶
Preparing your system¶
Warning
CentOS 5 users should be aware that some of these dependencies are not in the default repositories. These dependencies live in the the EPEL and RPMforge third-party repositories, which you may need to install to satisfy these dependencies.
In order to install Molly, there are several non-Python dependencies which are needed for Molly and its dependencies first.
Fedora¶
su -c 'yum install python-pip libxml-devel libxslt-devel python-devel postgresql-devel openldap-devel openssl-devel gdal-python proj geos libjpeg-devel imagemagick gcc make git libyaml'
CentOS¶
su -c 'yum install python-pip python26 python-setuptools python26-devel binutils libxslt-devel cyrus-sasl-devel openldap-devel ImageMagick proj proj-devel postgresql-devel postgresql-contrib geos-3.1.0 geos-devel-3.1.0 gdal libjpeg-devel make gcc openssl-devel libyaml-devel'
Ubuntu/Debian¶
Note
Different versions of Ubuntu and Debian may include different versions of libgeos, libgdal and postgresql which changes the package name. The version below are for Ubuntu 10.04.
sudo apt-get install python-pip build-essential python-gdal proj libgeos-3.1.0 binutils libgdal1-1.6.0 postgresql-server-dev-8.4 python-setuptools python-dev libxslt-dev libldap2-dev libsasl2-dev libjpeg-dev imagemagick libyaml
Note
Versions below are for Ubuntu 10.11
sudo apt-get install python-pip build-essential python-gdal proj libgeos-3.2.2 binutils libgdal1-1.7.0 postgresql-server-dev-8.4 python-setuptools python-dev libxslt1-dev libldap2-dev libsasl2-dev libjpeg62-dev imagemagick python-yaml
If your system isn’t one of those listed above, then you will need to ensure the following packages, or their equivalent on your platform, are available:
- libxml-devel
- libxslt-devel
- python-devel
- postgresql-devel
- openldap-devel
- openssl-devel
- gdal-python
- proj
- geos
- libjpeg-devel
- imagemagick
- gcc
- make
Installing Molly¶
Note
When installing using pip or Git it is possible to install Molly in an
isolated environment called a virtualenv, where Molly and its
dependencies can be installed seperately from the system-wide Python
packages. To do this, you simply need to install the virtualenv tool
(pip install virtualenv
) and then run virtualenv molly
,
followed by source molly/bin/activate
. Once the virtualenv is
activated, then you can install Molly using the directions below.
Please note that Molly will only appear installed when the virtualenv
is activated by running the activate script as indicated above.
Warning
Please note that the Python 2.6 binary on CentOS 5 is called ‘python26’.
On CentOS, it is therefore recommended that you work in a virtualenv
as detailed above. The virtualenv can be set to use Python 2.6
by creating it as virtualenv --python=/usr/bin/python26 molly
.
Once the virtualenv is activated, python
refers to version 2.6.
Using pip or easy_install¶
Note
On Fedora, pip is called ‘pip-python’ to avoid a clash with Perl’s pip
You can install Molly directly from the Python Package Index (PyPI) using the pip or easy_install commands:
pip install molly
From Git (latest development version)¶
To install the bleeding edge version of Molly, you can obtain Molly from our Git repository at git://github.com/mollyproject/mollyproject.git:
git clone git://github.com/mollyproject/mollyproject.git
This will create a clone (local copy) of the full Molly source code repository in the folder called ‘mollyproject’ in the directory where you ran the command. To install Molly, you can now use the setup.py script inside the newly created ‘mollyproject’ directory:
python setup.py install
If you intend on doing development work with Molly, you may prefer to use the development install facility which will allow you to work from your Molly repository without having to re-install after every code change:
python setup.py develop
Setting up your database¶
Warning
This is only intended as a quick introduction to configuring Postgres and may not be suitable for production environments.
Molly recommends the use of the PostgreSQL database with the PostGIS extensions as a database backend.
Installing Postgres¶
On Ubuntu and Debian:
sudo apt-get install postgresql-8.4 postgresql-8.4-postgis
On Fedora and CentOS:
su -c 'yum install postgresql postgresql-server postgresql-devel postgresql-contrib postgis'
You may then need to start your new Postgres database, this can be done with:
sudo service postgresql start
Once Postgres is created you must create a template database which can then be used to create the Molly database. This can be done by following the Creating a Spatial Database Template for PostGIS section in the Geodjango documentation.
Creating your database user¶
Warning
This section assumes a default distribution install of Postgres, if
you have changed the default security settings of Postgres, you may
need to specify the -U username -W password
options on the
createuser
command to authenticate as a superuser.
In default installs of Postgres, database usernames must match local usernames in order to authenticate, therefore, the user created on the database should match the username of the user that Molly runs as.
On most default installs, the ‘postgres’ user is a superuser on the database,
and the createuser
command should be run as this superuser:
sudo -u postgres createuser
Please enter your local username when creating this user, and the user does not need to be a superuser or able to create new users (roles) or databases.
If you have configured Postgres to require password authentication, the -P
option should be specified:
sudo -u postgres createuser -P
In this case, the username may not necessarily be the same as the local user.
Creating your database for Molly¶
Warning
This section assumes a default distribution install of Postgres, if
you have changed the default security settings of Postgres, you may
need to specify the -U username -W password
options on the
createdb
and psql
commands to authenticate as a superuser.
As with the createuser
command, the ‘postgres’ user is considered a
superuser and commands should be run as this user. To create the database,
assuming the PostGIS template was installed as template_postgis
you can use:
sudo -u postgres createdb -T template_postgis <database>
Replacing <database> with your database name. More information on postgis templates can be found in the PostGIS documentation.
And then you can give your user access to this new database:
sudo -u postgres psql -c "GRANT ALL ON DATABASE <database> TO <username>;"
Replacing <database> and <username> with your database and username respectively.
Creating a site template¶
Molly has the distinction between the core of Molly, and a Molly site. The core of Molly is the upstream Python package and associated data, whereas a site is a Django project which contains your settings for Molly, as well as any media, templates and other customisations to the Molly core. In order to get started with Molly, you will need to create a site.
The molly-admin createsite
command will create a template site which you can
then go and customise to your exact requirements:
This argument takes one argument which specifies the path to create the template in:
molly-admin createsite /PATH/TO/MY/SITE
Warning
Don’t call your site site. It will mess up Djangos with settings finder.
Once your site template has been created, the following files are created which are only templates and require you to edit them:
settings.py
- following the configuration guide;apache/molly.wsgi
- if you are deploying Molly as a WSGI app, then you will need to change the DJANGO_SETTINGS_MODULE setting in this file;apache/httpd.conf
- this is a sample Apache config file;templates/base.html
- this is a sample template override - for more information about this, please see the customising guide.
You will also have a compiled_media
folder, which should be ignored, and a
site_media
folder, which is where you should put any overrides for media on
your site.
Running Celery¶
New in version 1.4.
Molly now runs it’s periodic tasks (e.g. importing map data from OpenStreetMap) by using the popular Distributed Task Queue, Celery.
Celery requires us to install a message broker, the most popular choice here is RabbitMQ. There are other brokers available, as always we recommend reviewing the excellent Celery documentation to learn more.
Molly’s installation will have setup the celery worker, celeryd
and task
scheduler celerybeat
for us. We just have to start them:
python manage.py celeryd
python manage.py celerybeat
See also
Daemonizing Celery – Celery doesn’t daemonize itself so you’ll want to either run it as an init script or deploy it with some process management like supervisor.
Deploying Molly¶
Once you have configured your site appropriately, you’re almost ready to deploy your site!
This can be done using the command:
python manage.py deploy
You now have an install of Molly ready to serve to the world. The recommended way of doing this is by using Apache and mod_wsgi. The site template created by the installer consists of a WSGI script and a sample Apache config in the apache/ directory of your site.
The mod_wsgi documentation goes into considerable detail about how to deploy a Django application.
Starting a development server for Molly¶
This can be done by adding the --develop
command to the deploy command above:
python manage.py deploy --develop
Note
Starting a development server also skips the updating Wurfl step, in order to speed up development